materials and semi ﬁ nished products are called magnetic separation. Kanetec oﬀ ers a wide variety of magnetic separators for use with lump materials, bulk materials, clay like materials and liquids. A magnetic separator to select must be suitable for the purpose of use and have a sufficient capacity.
Batch magnetic separators are usually made from strong rare earth permanent magnets embedded in disinfectant proof material. The racks are designed to hold various sizes and numbers of tubes. Some of the separators have a removable magnet plate to facilitate easy washing of magnetic particles .Test tube magnetic separators enable separation of magnetic particles from volumes ranging ...
Suspended Magnetic separators have proven to be the most effective for the removal of unwanted iron from heavy burdens of material being conveyed on fast moving belts. They are ideal for separation applications on wet or dry, fine or coarse materials in large or small tonnages. Safe, sure, tramp iron removal protects costly processing machinery ...
31/5/2016· The tramp iron usually consists of stray bits from drills, hammerheads, and other tools which can seriously damage crushing equipment. The suspended type of Magnetic Separator has its place where space is not the deciding factor. The suspension of the magnet above the ore conveyor preceding the jaw crusher allows it to be swung aside when replacing conveyor belt or working on the conveyor
Wet High Intensity Magnetic Separator The WHIMS range includes 4, 16, 24 and 48 pole machines with either 68 or 120 millimetre separation matrix widths. WHIMS separators are suitable for applications requiring higher magnetic field gradients to remove weakly magnetic particles from non magnetic concentrates.
Unique indexing drum control results in superior particle separation and DRY sludge discharge. NEW Rare Earth Neodymium Iron Boron Separators have magnets 10 X more powerful and provide consistent 10 15 micron particle removal with M2, HSS, 400 grade S.S., heat treated steel, cast or ductile iron, and powdered metal.
MAGNETIC SEPARATION Based on magnetic behavior matrial can be classified as 1. Ferromagnetic very strong magnetic susceptibility iron, nickel and cobalt. 2. Paramagnetic weak magnetic susceptibility a) Weakly magnetic b) Strongly magnetic 3. Diamagnetic particles repelled by magnet 4. Non magnetic
1/1/2015· Figure 9.2 shows a permanent magnetic drum separator, which consists mainly of a permanent magnet system, a rotating drum, a separating chute, a feed tank, and a flushing pipe. For magnetite separation, the magnetic field intensity on the surface of the drum is between 0.1 and 0.4 T.However, for other applications, the intensity may reach as high as 0.8 T.
4/10/2018· Magnetic Separation and Iron Ore Beneficiation. Magnetic separation is an old technique for the concentration of iron ores and for the removal of tramp iron. Since 1849, a number of patents on magnetic separation have been issued in USA, and texts of some of the patents before 1910 describe a variety of magnetic separators for mineral processing.