The Jameson Cell grew out of a long term research program aimed at improving the recovery of fine particles by flotation. The work started at Imperial College London, and continued when Jameson moved in 1978 to the University of Newcastle, NSW, Australia, where he is Laureate Professor . Jameson's research into flotation began when he was at Imperial College London, in 1969. A colleague, Dr J. A. Kitchener of the Royal School of Mines, pointed out that many of the new mineral deposits bein
low zinc ore was fed to the plant. Marketable copper concentrate at 91 95% recovery was produced utilizing a high pH bulk sulphide rougher flotation and 2 cleaning stages. Because of increased levels of Zn of the ore body, a Cu/Zn separation circuit was initiated in early 2010 following an intensive laboratory test work program.
20/4/2016· Over grinding of silver minerals is detrimental to efficient flotation recovery, so the Flash Flotation Unit Cell is used in the grinding circuit to recover a large part of the silver and lead values as soon as liberated. The flowsheet is for a plant having a capacity in the range of 300 to 500 tons per day. A Pb Ag Zn Separation Circuit Flowsheet 1
27/4/2016· Flotation of Lead Ore. The flowsheet above was designed to treat economically approximately 200 tons in 24 hours of a low grade dump ore containing lead and zinc values as well as some silver in both sulphide and oxide form. Due to varying specific gravities of the values, gravity concentration in addition to flotation was indicated.
Pilot Flotation Plant. This set of pilot flotation plant is suitable for the laboratory of the ore dressing plant, mineral processing technology research institute, the university, Geology industry and metallurgical industry to do the flotation technology research on the gold ore,non ferrous metals ore, non metal ores, in order to provide reliable technical parameters for industrial production ...
low capital cost the small footprint of the Cell reduces the amount of steel required in its construction and, coupled with the simplicity of its design, has lower installation costs when compared with conventional or column flotation cells. low operating costs the lack of moving parts with a consequent lower power consumption, long wear life and easy access results in low operating costs.